Technical Specifications
| Isolation | Dynamic: 0.7Hz - 300Hz purely passive beyond 300Hz Only TS-C30: Dynamic: 1.2Hz - 300Hz mainly passive beyond 300Hz |
| Transmissibility |  Above 10 Hz transmissibility <0.01 (-40dB) |
| Correction Forces | +/- 8 N vertical +/- 4 N horizontal Only TS-300: +/- 16 N vertical +/- 8 N horizontal |
| Static Compliance | approx. 12 µm/N vertical approx. 30-40 µm/N horizontal Only TS-300: approx. 6 µm/N vertical approx. 15-20 µm/N horizontal Only TS-C30: 27 µm/N |
| Maximum load | 0 - 40 kg (TS-C30) 0 - 140 kg (TS-140) 0 - 150 kg (TS-150) 50 - 180 kg (TS-140+40) 0 - 300 kg (TS-300) 0 - 120 kg (TS-300LT) |
| Size | 300 x 300 x 70.0 mm (TS-C30) 500 x 600 x 84.0 mm (TS-140) 400 x 450 x 78.5 mm (TS-150) 500 x 600 x 84.0 mm (TS-140+40) 600 x 800 x 120 mm (TS-300 and TS-300LT) |
| Weight | 9.2 kg (TS-C30) 28.5 kg (TS-140) 17.5 kg (TS-150) 28.5 kg (TS-140+40) 53.0 kg (TS-300 and TS-300LT) |
Electrical
| Safety class | 1 |
| Power consumption | Typically 10 W 20W during load adjustment Only C-30: max 2.50W |
| Input voltage | 115-230 V AC ±10%, 50-60 Hz |
| Overload | The display indicates when the load is too heavy or severely unbalanced |
| Monitor signal | A multiplexed signal for display on oscilloscope shows vibration levels with and without isolation - for diagnostic purposes only |
| Front panel display menu | Displays instrumental status including: - height adjustment - isolation ON / OFF - overload - transportation locking - technical hot-line No front panel in the TS-C30 |
Normal Environmental Conditions
| Protection class | IP 20 |
| Temperature range | 5°C - 40°C |
| Relative humidity | 10-90 % (5-30 °C) / 10-60 % (30-40 °C) |
| Application | Indoor |
| Altitude | Up to 2000 m (6.500 ft) |
Table Top
| Size | 300 x 300 mm (TS-C30) 500 x 600 mm (TS-140) 400 x 450 mm (TS-150) 500 x 600 mm (TS-140+40) 600 x 800 mm (TS-300 and TS-300LT) |
| Material | Damped Aluminium sandwich construction Also available with tapped M6 on 25mm or customised Only TS-C30: Solid aluminium plate |
